EasyManuals Logo

Axis P3344 User Manual

Axis P3344
57 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
AXIS P3344 Fixed Dome Network Camera
Detectors
Detectors
Camera Tampering
Camera Tampering c an generate an al arm whenever the camera is repositioned, or when the lens is covered, sprayed or severely
defocused. To send an alarm, for example an email, an action rule must be set up.
To congure tampering:
1. Go to Detectors > Camera Tampering.
2. Set the Minimum duration, that is, the time that must elapse before an alarm is generated. This can help prevent false
alarms for known conditions that affect the image.
3. Select Alarm for dark images if an al arm should be g enerated if lights are dimmed or turned off, or if the lens is sprayed,
covered, or rendered severely out of focus.
4. Click Save .
To congure the product to send an alarm when tampering occurs:
1. Go to Events > Action Rules.
2. Click Add to set up a new action rule.
3. Enter a Name fo r the action rule.
4. Under Condition,selectDetectors from the Trigger list.
5. Select Tampering from the list of detectors.
6. Optionally, select a schedule and set additional conditions.
7. Select the action. To send an email, select Send Notication a
nd select a Recipient from the list of dened rec ipients.
Note
The While the rule is active option under Duration cannot be used with camera tampering, since camera tampering does not
have a duration and once it has been triggered it will not automatically return to its untrigge red state.
For more information on actions rules, see Events, on page 32.
Motion Detection
Motiondetectionisusedtogenerateanalarmwhenevermovementoccurs(orstops)intheview.Upto10IncludeandExclude
windows can be co ngured:
Include windows target specic areas within the whole video image
Exclude windows —dene areas within an Include window that should be ignored (areas outside Include windows
a
re automatically ignored)
Once congured, motion detection windows appear in the list of Detectors in Action rule setup. S ee Setting Up an Action Rule, on
page 32.
Note
Using the motion detection feature may decrease the product’s overall performance.
28

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Axis P3344 and is the answer not in the manual?

Axis P3344 Specifications

General IconGeneral
Maximum resolution1280 x 800 pixels
Pan range0 - 360 °
Tilt angle range0 - 170 °
Angle of rotation340 °
Camera shutter speed1/25000 - 1/6 s
Minimum illumination0.4 lx
Sensor typeCMOS
Optical sensor size1/4 \
Focal length range3.3 - 12 mm
Video motion detectionYes
Power source typePoE
I/O portsRJ-45
Dimensions (WxDxH)96 x 96 x 148 mm
Processor modelARTPEC-3
Flash memory128 MB
Supported network protocolsIPv4/v6, HTTP, HTTPS, QoS Layer 3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS.
Operating temperature (T-T)0 - 50 °C
Operating relative humidity (H-H)20 - 80 %
Weight and Dimensions IconWeight and Dimensions
Weight445 g

Related product manuals