EasyManuals Logo

Axis Q1755 User Manual

Axis Q1755
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
21
AXIS Q1755/-E - Video & Audio
The network camera can be set to trigger an event if the incoming sound level rises above, falls below, or passes the set
Alarm level.
Audio Output
If the sound from the speaker is too low or too high, adjust the output gain for the active speaker attached to the network
camera.
When satisfied with the settings, click Save, or click Reset to revert to previously saved settings.
Note:
To receive synchronized video in H.264 and audio, it is recommended that the time settings in the camera and client
computer are synchronized with an NTP Server. This is enabled in the camera under System Options > Date & Time.
Please refer to the help pages for more information.
Audio Clips
Audio clips can be played when an event occurs or manually from the Live View page. Audio clips are created either by
recording sound using the camera's microphone or by uploading a sound file to the camera. Audio clips that have been added
to the network camera are listed in the Audio Clip List page. You can add new clips, play, download, modify and remove clips.
Refer to the online help for further information.

Other manuals for Axis Q1755

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Axis Q1755 and is the answer not in the manual?

Axis Q1755 Specifications

General IconGeneral
Maximum resolution1920 x 1080 pixels
Camera shutter speed1/10000 - 1/2 s
Minimum illumination2 lx
Sensor typeCMOS
Optical sensor size1/3 \
Sample rate16 kHz
Supported network protocolsIPv4/v6, HTTP, HTTPS, QoS Layer 3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS, Pelco-D
Power source typePoE
Power over Ethernet (PoE)Yes
Power consumption (typical)17.4 W
Ethernet LAN (RJ-45) ports1
Dimensions (WxDxH)186 x 85 x 211.4 mm
Power requirements20 - 24 V AC
CertificationEN 55022 Class B, EN 61000-3-2, EN 61000-3-3, EN 55024, EN 61000-6-1, EN 61000-6-2, EN 60950-1, FCC Part 15, Subpart B, Class B, VCCI, Class B ITE, C-tick AS/NZS CISPR 22, ICES-003, Class B
Processor modelARTPEC-3
Flash memory256 MB
Internal memory128 MB
Operating temperature (T-T)0 - 45 °C
Operating relative humidity (H-H)20 - 80 %
Weight and Dimensions IconWeight and Dimensions
Weight985 g

Related product manuals