Axis Q1755 User Manual

30
AXIS Q1755/-E - Applications
Applications
Application Packages
The Applications feature allows you to upload third party applications for use on this device. Listed under Applications >
Packages are the applications that have already been installed. Click on the name to view the menu options - Settings,
License and About.
Settings - This is dependent on the application.
License - Once uploaded some applications need a license to run, and a license code is required for the uploaded application.
If there is an Internet connection in the camera, Automatic Installation appears in the web page. If there is no Internet
connection to the camera, go to www.axis.com to acquire a License key file. You will need a license code and the device's
serial number to receive a license key.
About - Details support for this application. To upload an application, browse to the package and click Upload Package.
Installed Applications - A list of installed applications with information about the version, and the vendor; the status of the
application (running or not running), and information about the license (if installed).
Start/Stop - Start or stop the application.
Remove - To delete an application, select it and click Remove.
Log - To generate a log of the application happenings, select an application and click Log. This log is helpful when requesting
support from the application’s vendor.

Axis Q1755 Specifications

General

Maximum resolution	1920 x 1080 pixels
Camera shutter speed	1/10000 - 1/2 s
Minimum illumination	2 lx
Sensor type	CMOS
Optical sensor size	1/3 \
Sample rate	16 kHz
Supported network protocols	IPv4/v6, HTTP, HTTPS, QoS Layer 3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS, Pelco-D
Power source type	PoE
Power over Ethernet (PoE)	Yes
Power consumption (typical)	17.4 W
Ethernet LAN (RJ-45) ports	1
Dimensions (WxDxH)	186 x 85 x 211.4 mm
Power requirements	20 - 24 V AC
Certification	EN 55022 Class B, EN 61000-3-2, EN 61000-3-3, EN 55024, EN 61000-6-1, EN 61000-6-2, EN 60950-1, FCC Part 15, Subpart B, Class B, VCCI, Class B ITE, C-tick AS/NZS CISPR 22, ICES-003, Class B
Processor model	ARTPEC-3
Flash memory	256 MB
Internal memory	128 MB
Operating temperature (T-T)	0 - 45 °C
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Weight	985 g