Axis S2216 Mk II - Page 17

AXIS Camera Station S2216 Mk II Appliance
Manage AXIS Camera Station Pr o user accounts
Views
The following access privileges are available for users or groups with the Operator or Viewer role. Y ou can select multiple views
and set the access privileges.
Access
Allow access to the views in AXIS Camera Station S22 16 Mk II
Appliance.
Edit
Allow to edit the views in AXIS Camera Station S22 16 Mk II
Appliance.
I/O
The following access privileges are available for users or groups with the Operator or Viewer role.
Access
Allow full access to the I/O port.
Read
Allow to view the state of the I/O port. The user can’t change
the port state.
Write
Allow to change the state of the I/O port.
System
Y ou can’t congure greyed out access privileges in the list. Privileges with check mark means the user or group have this privilege by
default.
The following access privileges are available for users or groups with the Operator role. T ake snapshots is also available for the
Viewer role.
T ake snapshots Allow to take snapshots in the live view and recordings modes.
Export recordings Allow to export recordings.
Generate incident report
Allow to generate incident reports.
Prevent access to recordings older than Prevent access to recordings older than the specied number of
minutes. When using search, the user doesn’t nd recordings
older than the specied time.
Access alarms , tasks , and logs
Get alarm notications and allow access to the Alarms and
tasks bar and Logs tab .
Access data search Allow searching for data to track what happened at the time of
an event.
Access control
The following access privileges are available for users or groups with the Operator role. Access Management is also available
for the Viewer role.
Access control conguration
Allow conguration of doors and zones, identication
proles, card formats and PIN, encrypted communication, and
multi - server .
Access management Allow access management and access to the active directory
settings.
System health monitoring
The following access privileges are available for users or groups with the Operator role. Access to system health monitoring
is also available for the Viewer role.
17