Axis S2216 Mk II - Configure AXIS Camera Station Pro

AXIS Camera Station S2216 Mk II Appliance
Configur e your device
Delete saved passwords T o delete saved usernames and passwords all connected servers,
click Delete saved passwords .
Change client proxy settings
Y ou might need to change the client proxy settings to connect
to a server , click Change client proxy settings .
Log in on a remote server
1. Select Remote server .
2. Select a server from the Remote server drop - down list or enter the IP or DNS address. If the server isn’t listed, click to
reload all the available remote servers. If the server is congured to accept clients on a different port than the default port
number 55752, enter the IP address followed by the port number , for example, 192.168.0.5:4600 1.
3. Y ou can:
- Select Log in as current user to log in as the current Windows® user .
- Clear Log in as current user and click Log in . Select Other user and provide another username and password
to log in with a different username and password.
Sign in to AXIS Secure Remote Access
Note
• When trying to connect to a server using Axis Secure Remote Access, the server can’t upgrade the client automatically .
• If the proxy server is between the network device and the AXIS Camera Station S22 16 Mk II Appliance server , you must
congure the proxy settings in Windows on the AXIS Camera Station S22 16 Mk II Appliance server to access the server
using AXIS Secure Remote Access.
1. Click the Sign in to AXIS Secure Remote Access link.
2. Enter your My Axis account credentials.
3. Click Sign in .
4. Click Grant .
Congure AXIS Camera Station Pro
This tutorial will walk you through the basic steps to make your system up and running.
Before you start:
• Congure your network depending on your installation. See .
• Congure your server ports if needed. See .
• Consider security issues. See .
After necessary congurations, you can start to work with AXIS Camera Station Pro:
1.
2.
3.
4.
5.
8