Axis S2216 Mk II - Install Your Device; Setup Examples

AXIS Camera Station S2216 Mk II Appliance
Install your device
Install your device
For instructions on how to install the product, see the installation guide included in the box or on the product’s support page
on axis.com .
Setup examples
Setup in an independent surveillance network
Y ou can create an independent surveillance network which has no interconnectivity to another external network. This setup is a basic
plug and play installation. The built - in switch’s DHCP server is enabled by default. As soon as you plug the cameras into the P oE
ports, the cameras will power on and obtain an IP address and be accessible via AXIS Camera Station Pro.
Difculty level
Basic
Benets
Dedicated surveillance network with no interconnectivity to
another external networkPlug and play installation
Limitations BandwidthP oE budgetNo remote access
Actions needed
Change the default password for the built - in switchRegister the
AXIS Camera Station Pro license
Connectors used
P oE Ethernet portsUSB 2.0 ports (for keyboard and
mouse)Displayport
T M
or HDMI connector
Connectors NO T used
Switch uplink portServer uplink portUSB 3.2 port (front
side)Universal audio jack (front side)
Setup in an existing network
Y ou can create a surveillance network within an existing network. This means that the surveillance network is separated from
the existing network.
4