AXIS Camera Station S2216 Mk II Appliance
Manage your device
6. Fasten the hard drive to the hard drive carrier with four screws.
7. Insert the hard drive carrier into the hard drive slot until the carrier connects with the backplane.
8. Close the hard drive carrier handle to lock the hard drive in place.
9. Reattach the front bezel.
1 0. Start the system.
Add a new recording storage
1. Create and format a new hard disk partition in Windows.
1.1 Click the Start button and type Create and format hard disk partitions in the search bar . Select the result to
open the Disk Management tool.
1.2 Click OK if the Initialize Disk popup appears. If it doesn’t, right - click on the new hard drive and select Initialize
Disk .
1.3 Right - click on an unallocated region on the newly initiailized disk and select New Simple V olume .
1.4 Follow the wizard to set the volume size, assign a drive letter , and format the partition.
1.5 Complete the wizard to create the new simple volume.
2. Add a new recording storage in Axis Camera Station Pro.
2.1 Open Axis Camera Station Pro.
2.2 Go to Storage > Management
2.3 Click Add...
2.4 Select the newly added drive and click OK .
2.5 Go to Storage > Selection
2.6 Select which devices you want to transfer recording data to the new drive.
2.7 In the Store to drop - down list, select the new drive and click Apply .
For more information about storage management, see Axis Camera Station Pro — User manual .
Create RAID volume
For instructions on how to create RAID volume, please see the online version of this user manual.
Initiate RAID volume in Microsoft Windows®
T o congure a new volume:
1. Right - click the Start menu and select Disk Management .
2. In the pop - up “ Initialize Disk ”, select GPT and click OK .
3. Right - click the unallocated disk and select New Simple V olume .
- Follow the instructions in the setup assistant.
When the setup assistant is nished, Disk Management shows the new volume. Close Disk Management for the system to use the
new volume.
2 1
To Next Page
Loading...
