Axis S2216 Mk II - Page 5

AXIS Camera Station S2216 Mk II Appliance
Install your device
Note
When you use an additional recorder , for example, the AXIS S30 Recorders, the appliance does not route network data from
the surveillance network to the server network for recording. Make sure that the AXIS S30 Recorders are connected to
the same network as the cameras.
Difculty level
Advanced
Benets Ability to use an AXIS Camera Station Pro client to connect to
S22 series over the network.Network segregation
Limitations May require you to follow corporate network polices
Actions needed
Change the default password for the built - in switchRegister the
AXIS Camera Station Pro license
Connectors used P oE Ethernet portsEthernet port — Server uplink for connection
to network(Optional) USB 2.0 ports (for keyboard and
mouse)(Optional) Displayport
T M
or HDMI connector
Connectors NO T used
Switch uplink portUSB 3.2 port (front side)Universal audio jack
(front side)
Connect the switch directly to the corporate network
This setup integrates the system directly into your existing corporate network, allowing cameras to be accessed and monitored from
anywhere on the network.
5