AXIS Camera Station S2216 Mk II Appliance
Manage the built - in switch
3. If you have selected Manual , you can change the power allocated to the connected device in the P ower allocated column.
4. If you want to change the priority of the connected device, select a priority for that device. The priority of other devices
will change automatically .
Example:
In this example, the switch has a total power budget of 135 W . A P oE class 4 device requests 30 W power but only consumes 15 W . A
P oE class 2 device requests 7 W power but only consumes 5 W power .
Allocate power by P oE class
The power requested by each device is determined by the P oE class. The switch can power 4 P oE class 4 devices and 2 P oE class 2
devices. The total power requested is (4 x 30) + (2 x 7) =134 W . The actual power consumed is (4 x 15) + (2 x 5) = 7 0 W . In this way ,
all connected devices are guaranteed enough power and the priority is less important.
Allocate power manually
24
To Next Page
Loading...
