6-30
Chapter 6. LIST OF DISPLAYS AND SETTING DATA
Lock bank
Bank selection:
Display Item Contents
Initial
value
User
level
Notes
Key lock 0: All settings are possible.
1: Mode, event, operation display,
SP, UF, lock, and manual MV can
be set.
2: Operation display, SP, UF, lock,
and manual MV can be set.
3: UF, lock, and manual MV can be set.
0 0
When two sets of passwords
(1A and 1B, 2A and 2B) are
matched, the setting is
possible.
[mode] key operation, MV
setting in MANUAL mode, key
lock, password display, and
password 1A to 2B can be set
when the key lock (
LOC
) is a
value of 0 to 3.
Communication lock 0: RS-485 communication read/
write enabled.
1: RS-485 communication read/
write disabled.
0 2
Loader lock 0: Loader communication read/
write enabled.
1: Loader communication read/
write disabled.
0 2
Password display 0 to 15
5: Password 1A to 2B display
0 0
Password 1A 0000 to FFFF (Hexadecimal value)
0000 0
Displayed when the password
display (
PASS
) is “5” and two
sets of passwords (1A and 1B,
2A and 2B) are matched.
Password 2A 0000 to FFFF (Hexadecimal value)
0000 0
Password 1B 0000 to FFFF (Hexadecimal value)
0000 0
Displayed when the password
display (
PASS
) is “5”.
Password 2B 0000 to FFFF (Hexadecimal value)
0000 0
Instrument information bank
Bank selection:
Display Item Contents
Initial
value
User
level
Notes
ROM ID 2 fixed ----
2
Identification of ROM
firmware setting is disabled.
ROM Version 1 XX.XX (2 digits after decimal point) ----
2
ROM Version 2 XX.XX (2 digits after decimal point) ----
2
LOADER Information ----
2
EST Information ----
2
Manufacturing date
code (year)
Year - 2000
Example: "3" means the year 2003.
----
2
Manufacturing date and unit
identification No. setting is
disabled.
Manufacturing date
code (month, day)
Month + Day ÷ 100.
Example: "12.01" means the 1st day
of December.
----
2
Serial No. ----
2
To Next Page
Loading...
