User Manual
Enable SSID Broadcast If you select the Enable SSID Broadcast checkbox, the
Wireless Router SSID will broadcast its name (SSID) on the air.
Enable Wireless Security The wireless security function can be enabled or disabled.
If disabled, the wireless stations will be able to connect the router without
encryption. It is strongly recommended that you choose this option to encrypt
your wireless network. The encryption settings are described below.
Authentication Type You can select one of the following authentication types:
WEP - Select WEP authentication type based on 802.11 authentications.
WPA-PSK/WPA2-PSK - Select WPA/WPA2 authentication type based on
pre-shared passphrase.
WPA/WPA2 - Select WPA/WPA2 authentication type based on Radius
Server.
Authentication Options You can select one of the following authentication options:
When you select WEP for authentication type you can select the following
authentication options:
Automatic Select Shared Key or Open System authentication type
automatically based on the wireless station request.
Shared Key Select 802.11 Shared Key authentication.
Open System Select 802.11 Open System authentication.
When you select WPA-PSK/WPA2-PSK for authentication type you can select
Automatic, WPA –PSK or WPA2-PSK as authentication options.
When you select WPA/WPA2 as an authentication type you can select Automatic
WPA or WPA2 as authentication option.
Page 47 of 102
To Next Page
Loading...
Need help?
General
