User Manual
WEP Key Format You can select ASCII or Hexadecimal format. ASCII Code Format
stands for any combination of keyboard characters in the specified length.
Hexadecimal format stands for any combination of hexadecimal digits (0-9, a-f, A-
F) in the specified length.
WEP Key settings Select which of the four keys will be used and enter the
matching WEP key information for your network. These values must be identical
on all wireless stations in your network.
Key Type You can select the WEP key length (64-bit, or 128-bit, or 152-bit) for
encryption. Disabled means the WEP key entry is invalid.
For 64-bit encryption - You can enter 10 hexadecimal digits (any
combination of 0-9, a-f, A-F, zero key is not permitted) or 5 ASCII
characters.
For 128-bit encryption - You can enter 26 hexadecimal digits (any
combination of 0-9, a-f, A-F, zero key is not permitted) or 13 ASCII
characters.
For 152-bit encryption - You can enter 32 hexadecimal digits (any
combination of 0-9, a-f, A-F, zero key is not permitted) or 16 ASCII
characters.
Encryption When you select WPA-PSK/WPA2-PSK or WPA/WPA2 for
Authentication Type you can select Automatic, TKIP or AES as Encryptions.
Page 48 of 102
To Next Page
Loading...
Need help?
General
