Aztech WL830RT4 User Manual

User Manual
To setup a virtual server entry:
1. Click Add New.
2. Select the service you want to use from the Common Service Port list. If the
Common Service Port list does not have the service that you want to use, type the
number of the service port or service port range in the Service Port box.
3. Type the IP Address of the computer in Server IP Address.
4. Select the protocol used for this application:
 TCP
 UDP
 All
5. Select a Status.
6. Click Save.
Page 60 of 102

Aztech WL830RT4 Specifications

General

Brand	Aztech
Model	WL830RT4
Category	Wireless Router
Language	English