User Manual
Add or Modify a Port Triggering Entry
There are many popular applications in the Popular Application list. You can select it, and
the application will fill in the Trigger Port, incoming Ports Range boxes and select Enable.
It has the same effect as adding a new rule.
To modify or delete an existing entry:
1. Click Modify in the entry you want to modify. If you want to delete the entry, click
the Delete.
2. Modify the information.
3. Click Save.
Click Enable All to make all entries enabled
Click Disabled All to make all entries disabled.
Click Delete All to delete all entries
Note:
1. When the trigger connection is released, the according opening ports will be
closed.
2. Each rule allowed to be used only by one host on LAN synchronously. The trigger
connection of other hosts on LAN will be refused.
3. Incoming Port Range cannot overlap each other.
Page 64 of 102
To Next Page
Loading...
Need help?
General
