Page 12 of 59 BACTcontrol – User Manual – V0.4.4 microLAN b.v.
4. TECHNICAL DETAILS
4.1 CONDITIONS
The BACTcontrol is specially designed for use on a table or on a trestle.
Place the BACTcontrol in a properly ventilated area
Make sure the BACTcontrol setup is at least 20 cm from a wall
The humidity conditions in the area should be between 20 and 80 %
Keep the BACTcontrol out of direct solar irradiation
Protect the BACTcontrol from rain
The area temperature should be between 15– 35°C / 59 – 86°F. In case of higher
temperatures, an optional Cooling-Unit is recommended (Part nr: 01BACT001A516)
Figure 5 Optional enclosure Cooling-Unit (Part nr: 01BACT001A516)
4.2 MATERIAL AND WEIGHT
Cabinet: Stainless steel 316
Protection classification: IP 54 (IP 65 optional)
To Next Page
Loading...