Page 14 of 59 BACTcontrol – User Manual – V0.4.4 microLAN b.v.
Tube size: 2,5 mm ID x 4,0 mm OD
Sample flow: 3l/h
4.5 ELECTRICAL CONDITIONS
Operation voltage: 230V - 50Hz or 110V – 60Hz
Nominal power consumption: <50W (without optional cooling unit)
Peak power consumption: <700W (included optional cooling-unit)
It is recommended to protect the electrical supply with an earth leakage circuit breaker
4.6 ENVIRONMENTAL CONDITIONS
Place the BACTcontrol in a properly ventilated area
Temperature between 15– 30°C / 59 – 86°F, (at higher temperatures, an optional
Cooling-unit is recommended)
No direct solar irradiation
Protect from rain
Humidity conditions between 20 and 80 %
4.7 SPECIFICATIONS OPTIONS
Modem slot for UMTS, ISDN or analog (modem optional)
Second sample inlet / extra rinsing
Cooling-Unit (if higher than 30°C / 86°F)
4.8 GENERAL COMPUTER SPECIFICATIONS
Integrated PC with Windows professional SP1 operating system
Graphical user interface with touchscreen
Touchscreen power DC12V/5A
To Next Page
Loading...