Page 42 of 59 BACTcontrol – User Manual – V0.4.4 microLAN b.v.
8. MAINTENANCE SCHEDULE
This chapter describes the maintenance schedule.
Always use the original BACTcontrol spare parts which are only provided by
microLAN and microLAN distributors.
8.1 DAILY MAINTENANCE
Daily maintenance can be done on any time the instrument is visited. This is not really
necessary for the instrument but can be seen as extra attention to the instrument
8.1.1 VISUAL CHECK
Open the front of the BACTcontrol.
Check visually if tubes are connected properly
and if there are no leakages on the instrument.
When leakages are detected on the connectors
of the tubing, tighten nuts.
(Be careful ! do not over tighten nuts)
To Next Page
Loading...
