microLAN b.v. BACTcontrol – User Manual – V0.4.4 Page 29 of 59
7. INTRODUCTION TO THE BACTCONTROL
SOFTWARE
For a complete explanation of the software, see: BACTcontrol Software Manual
7.1 LOG IN
The operating terminal is a touchscreen that can be operated through finger contact or
with a touchscreen pen. Do not touch the screen of the operating terminal with hard
objects, this might damage the terminal.
7.2 STATUS
In the status section, the main procedures can be operated. Details of the
measurement and possible alarms are displayed. Figure 15 shows the different
options that are available in the status screen together with the information of the
current or last measurement.
Figure 15 Status screen
To Next Page
Loading...