www.baldormotion.com
Preset Moves & PLC Task 6-9MN1901
6.3.3 Testing the PLC Task
There is no way to test the PLC Task other than causing the required conditions to occur. For
example, if you have an action that is triggered by the condition Digital input 0, then activating
digital input 0 will cause the corresponding action to occur .
6.4 Saving presets or PLC conditions
Preset tables and PLC conditions can be saved separately on the PC for later recall. For this
purpose, Presets mode and PLC Task mode have Open, Save and Help icons just above their
tables.
1. Click the Save icon just above the table.
2. In the Save As dialog, enter a filename.
Presets tables are saved with a .pre file extension.
PLC Task tables are saved with a .plc file
extension.
To open a file, click the open icon select the file and click Open. When the table has loaded,
remember to click Apply to download the table to the MintDrive
II
.
Open Save Help
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
