Balluff BNI00E7 User Manual

www.balluff.com
23
7 Cyclical transmission
Parameterization
while running
The device can be re-parameterized while running. Re-parameterization means that the ports
are reconfigured or Byte Swap is enabled. Follow this procedure to re-parameterize while
running:
While the Operation Condition Request flag is set no IO-Link communication takes place.
Outputs are disabled and inputs are not read. Settings can be made just as is possible during
the Initial Processing phase.
The operation condition setting completion flag indicates that the configuration was
successfully applied.

Balluff BNI00E7 Specifications

General

Brand	Balluff
Model	BNI00E7
Category	I/O Systems
Language	English