Balluff Ethernet/IP BTL7-V50D Series - Page 63

28 english
7
Web server (continued)
7.2.2 General System Settings
The General system settings influence the settings in
the same way as the device configuration object
(see chapter5.2 on page13).
Menu entry Description Reference
Magnet Mode The number of magnets Attribute6:
Number of magnets (Number of Magnets) on page15
FMM Timeout / ms FMM alarm time Attribute16:
FMM timeout on page15
Operating mode Operating mode Activate CIP-Sync (Synchronous Mode) on page13
Period / ns Measurement interval Synchronous Period, Synchronous Shifttime and
Synchronous Offset on page13
Synchronous Shifttime / ns Measurement delay Synchronous Period, Synchronous Shifttime and
Synchronous Offset on page13
Averaging filter Averaging of measurements Averaging (Averaging Filter) on page15
BTL7-V50D-…
Configuration Manual