Balluff Ethernet/IP BTL7-V50D Series - Page 62

www.balluff.com 27english
7.2 Setup menu
The sensor settings can be viewed in the Setup menu and
changed by users logged in as administrators.
There are five sub-menus:
– Network settings (see chapter7.2.1)
– General System Settings (see chapter7.2.5)
– Magnet Configuration Settings (see chapter7.2.3)
– Account Password Management (see chapter7.2.4)
– General System Functions (see chapter7.2.5)
7.2.1 Network settings
On this page, the IP address, sub-net mask and gateway
address are shown and can also be changed. See
chapter4 Basic configuration on page9 for details.
After changing these parameters, saving via
Save network
SettingS and a restart, the BTL7-V50D-… can only be
reached via the new addresses.
7
Web server (continued)
BTL7-V50D-…
Configuration Manual