www.balluff.com 31english
8
Balluff IO-Link Device Manager
The program Balluff IO-Link Device Manager is for project
planning and the diagnosis of I/O-Link devices.
It additionally has an Ethernet interface, which it can used
to control further devices.
BTL7-V50D-… has an interface to this program and can
be monitored in the system. However, configuration and
control of the BTL7-V50D-… is not possible.
BTL7-V50D-… is treated like an IO-Link Master and its
magnets as IO-Link devices. More details on the program
and its operation are described in the documentation
Balluff IO-Link Device Manager.
BTL7-V50D-…
Configuration Manual
To Next Page
Loading...
