EasyManua.ls Logo

Bandit 20XP - Page 45

Bandit 20XP
126 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Bandit
41Copyright 12/17
MODEL 20XP MAINTENANCE
1. Check anvil clearance, tightness, and wear.
2. Check alternator and fan belts on engine, adjust or replace.
3. Check spring tension on easy climb feed system.
4. Check and retighten wheel lug nuts.
5. Lubricate steel friction areas: pivoting, hinged, sliding, & rotating areas
(i.e. conveyor chain, cabinet doors, discharge, discharge ipper, engine adjusters, etc).
6. Use a dry lube on any chain driven component.
7. Check pump bearing block is full of gear lube.
WEEKLY CHECK LIST
Every week these checks must be made:
OK REPAIRED
1. Check towing hitch for wear, keep pintle ring greased (if equipped).
2. Check discharge, and infeed hopper for wear.
3. Inspect feedwheel & conveyor motor connection, sprockets, and bushings.
4. Check feedwheel teeth for sharpness.
5. Check hydraulic pumps, motors and gear boxes.
6. Check, retighten all bearing and chipper sheave bolts.
7. Check infeed conveyor chain tightness and tracking (if equipped).
8. Check hydraulic function pressures. Set to specied PSI (bar).
9. Check and ll tires to rated pressure (if equipped).
10. Check and grease or oil wheel bearings, follow axle MFG. instructions (if equipped).
11. Check and adjust brakes, follow axle MFG. instructions (if equipped).
12. Check and adjust discharge swivel and feedwheel drive chain tension.
MONTHLY CHECK LIST
Every month these checks must be made:
OK REPAIRED
1. Replace hydraulic lter(s) after rst 10 hours then quarterly or every 400 hours.
2. Grease swivel plates for discharge as needed.
3. Replace high pressure oil lter(s) (if equipped) after rst 10 hours then quarterly
or every 400 hours.
3 MONTH CHECK LIST
OK REPAIRED
Every 3 months these checks must be made:
1. Pack the female splines of the pump bearing block with grease.
6 MONTH CHECK LIST
OK REPAIRED
Every 6 months these checks must be made:
1. Change hydraulic oil and ush the hydraulic tank.
2. Replace hydraulic suction screen(s) annually or every 2000 hours.
3. Drain and clean the fuel tank.
YEARLY CHECK LIST
OK REPAIRED
Every 6 months these checks must be made:

Related product manuals