Transport and storage
266 8LS...-3 user's manual V2.50
Storage
Caution!
Damage caused by degraded material properties.
Storage for long periods of time or storage under improper conditions can cause certain materials to
age prematurely, to have degraded properties and to become damaged. Damaged components can
then result in further damage to property.
Recommendations to avoid damage during storage:
•
Reduce the storage time to a minimum and do not exceed the maximum storage time of 2 years.
•
Rotate the motor shaft a few turns at least every 6 months either by hand or at a low speed
(max. 50 rpm). Bearing noise can occur during the run-in phase, which is perfectly normal and
is not a sign of bearing damage.
•
Apply a preservative coating to unprotected components such as the shaft end.
•
Avoid contact corrosion.
•
Use the original packaging.
•
Use covers to protect against dust.
•
Check the seals for damage when the item is issued or prior to use.
3.1 Lifting eye bolts
If motors have eye bolts, only lift the motors using the eye bolts. The position of the eye bolts depends on the
overall length of the motor.
Caution!
The eye bolts included in delivery are intended exclusively for lifting the motor without any additional
components installed!
Types of eye bolts
8LSA / 8LSC / 8LSO / 8LSP
8LSA5A/B/C / 8LSC5A/B/C
8LSA...-3 / 8LSC...-3
8LSA 8LSC Availability of eye bolts
8LSA5A/B/C...-3 8LSC5A/B/C...-3 Yes
8LSA73...-3 8LSC73...-3 Yes
8LSA74...-3 8LSC74...-3 Yes
8LSA75...-3 8LSC75...-3 Yes
8LSA76...-3 8LSC76...-3 Yes
8LSA77...-3 8LSC77...-3 Yes
8LSA78...-3 8LSC78...-3 Yes
8LSA83...-3 8LSC83...-3 Yes
8LSA84...-3 8LSC84...-3 Yes
8LSA85...-3 8LSC85...-3 Yes
8LSA86...-3 8LSC86...-3 Yes
8LSO...-3 / 8LSP...-3
8LSO 8LSP Availability of eye bolts
8LSO9...-3 8LSP9...-3 Yes
To Next Page
Loading...
General