What to do if Banner DF-G3 Long Range Expert shows a Threshold Error?
If the Banner Amplifier displays a Threshold Error, it indicates severe contamination or changes in the taught condition. Cleaning or correcting the sensing environment and/or re-teaching the sensor is required.
What to do if Banner Amplifier shows a Threshold Alert?
If the Banner Amplifier displays a Threshold Alert, it indicates severe contamination or changes in the taught condition. Cleaning/correcting the sensing environment and/or a re-teach of the sensor is highly recommended.
Why is my Banner DF-G3 Long Range Expert showing very stable operation?
When the difference of the taught conditions greatly exceeds the required minimum, the Banner Amplifier operation is very stable.
Why minor sensing variables do not affect Banner DF-G3 Long Range Expert sensing reliability?
When the difference of the taught conditions sufficiently exceeds the required minimum, minor sensing variables will not affect the Banner Amplifier sensing reliability.
Why minor sensing variables may affect Banner Amplifier sensing reliability?
When the difference of the taught conditions just meets or exceeds the required minimum, minor sensing variables may affect the Banner Amplifier sensing reliability.
Describes different sensor models and their specifications.
Explains how to mount the sensor on a DIN rail or bracket.
Shows NPN/PNP wiring and dual output configurations.
Details how to access and navigate the sensor's programming menu.
Explains light/dark operate modes and health alarms.
Lists available TEACH and SET methods for sensor configuration.
Introduces adjustment modes and covers TEACH/SET methods like Two-Point, Dynamic, Window, Light, Dark, Calibration.
Covers common operational problems and their solutions.
Provides the manufacturer's limited warranty terms.
To Next Page
General