Banner DF-G3 Long Range Expert - 4 Specifications

4
Specicaons
Sensing Beam
DF-G3: Visible red, 635 nm
DF-G3IR: Infrared, 850 nm
DF-G3LIR: Long infrared, 1450 nm
Supply Voltage
10 V to 30 V dc Class 2 (10% maximum ripple)
Power and Current Consumpon (exclusive of load)
Standard display mode: 840 mW, Current consumpon < 35 mA at 24 V dc
ECO display mode: 672 mW, Current consumpon < 28 mA at 24 V dc
Supply Protecon Circuitry
Protected against reverse polarity, overvoltage, and transient voltages
Delay at Power Up
500 milliseconds maximum; outputs do not conduct during this me
Output Conguraon
1 or 2 current sinking (NPN) or current sourcing (PNP) outputs, depending on model
Output Rang
100 mA maximum combined load (derate 1 mA per °C above 30 °C)
OFF-state leakage current: < 5 µA at 30 V dc;
ON-state saturaon voltage: NPN: < 1.5V; PNP: < 2 V
Output Protecon
Protected against output short-circuit, connuous overload, transient overvoltages, and false pulse on power-up
Response Speed and Features
Descripon Response
Speed
Repeon Period Repeatability Cross-Talk
Avoidance
Energy Ecient Light
Resistance
Maximum Range,
Red
22
Maximum Range,
IR850
23
High Speed 500 µs 100 µs 100 µs No No 1200 mm 2400 mm
Fast 1000 µs 100 µs 150 µs Yes No 1500 mm 3000 mm
Standard 2 ms 100 µs 180 µs Yes Yes 1500 mm 3000 mm
Long Range 8 ms 100 µs 180 µs Yes Yes 1950 mm 3900 mm
Extra Long Range 24 ms 100 µs 180 µs Yes Yes 3000 mm 6000 mm
Indicators
Red 4-digit Display: Signal Level
Green 4-digit Display: Threshold
(In Program Mode, Red and Green displays are used for programming menus)
Yellow LED: Output conducng
Operang
Condions
Temperature: −10 °C to +55 °C (+14 °F to +131 °F)
Storage Temperature: −20 °C to +85 °C (−4 °F to +185 °F)
Humidity: 50% at +50 °C maximum relave humidity (non-condensing)
Environmental Rang
IEC IP50, NEMA 1
Connecons
PVC-jacketed 2 m or 9 m (6.5  or 30 ) 4-wire or 5-wire integral cable; or integral 4-pin or 5-pin M8/Pico-style quick disconnect; or 150 mm (6 in) cable with a 4-pin
or 5-pin M8/Pico-style quick disconnect; or 150 mm (6 in) cable with a 4-pin or 5-pin M12/Euro-style quick disconnect
For Q3 or Q7 5-pin models, either a 5-pin M8/Pico-style or a 6-pin M8/Pico-style mang cordset may be used
Construcon
Black ABS/polycarbonate alloy (UL94 V-0 rated) housing, clear polycarbonate cover
22
Excess gain = 1 (high sensivity), opposed mode sensing. PIT46U plasc ber used for visible LED models.
23
Excess gain = 1 (high sensivity), opposed mode sensing. IT.83.3ST5M6 glass ber used for IR models.
DF-G3 Long Range Expert
™
Dual Display Fiber Amplier
26 www.bannerengineering.com - Tel: 763.544.3164