Banner DF-G3 Long Range Expert - Page 27

Adjustments
3-way RUN/PRG/ADJ Mode Switch
2-way LO/DO Switch or CH1/CH2 Switch
3-way +/SET/- Rocker Buon
• Expert-style teaching (Two-Point and Dynamic TEACH, Light/Dark/Window/Calibraon SET)
•
Manually adjust sensivity (from "+" and "-" rocker buon only)
•
Output Selecon, TEACH Selecon, Response Speed, Oset Percent, Auto Thresholds, Delays/Timers, Sensivity
Selecon, Input Selecon, Display
Readout, Gain Selecon, Factory Defaults (from top panel)
• Top panel interface lockout (from remote input only)
Factory Default Sengs: (Single Output Model)
Seng Factory Default
Threshold 5024
TEACH Selecon Two-Point TEACH
Output Response Time Standard: 2000 µs
Oset Percent 10%
Auto Thresholds OFF
OFF Delay 0 (Disabled)
OFF One-Shot 0 (Disabled)
ON Delay 0 (Disabled)
ON One-Shot 0 (Disabled)
Display Readout Numeric, ECO disabled, Normal Orientaon
Gain Selecon Auto Gain
Factory Default Sengs: (Dual Output Model)
Seng Factory Default
Output Lo
Threshold 5024
TEACH Selecon Two-Point TEACH
Output Response Time Standard: 2000 µs
Oset Percent 10%
Auto Thresholds OFF
OFF Delay 0 (Disabled)
OFF One-Shot 0 (Disabled)
ON Delay 0 (Disabled)
ON One-Shot 0 (Disabled)
Display Readout Numeric, ECO disabled, Normal Orientaon
Sensivity
Selecon Std
Gain Selecon Auto Gain
DF-G3 Long Range Expert
™
Dual Display Fiber Amplier
www.bannerengineering.com - Tel: 763.544.3164 27