Banner DF-G3 Long Range Expert User Manual

1 Product
Descripon
Advanced sensor with dual digital displays for use with plasc and glass ber opc assemblies; single or dual discrete output models are
available.
• World-class long-range sensing capability, more than 6 m (20 ) with opposed mode bers
• Models with high visibility red, extreme high-power infrared and water-detecng long infrared sensing beams available
•
Cross-talk avoidance funcon allows seven inspecons in dense sensing point applicaons
• Energy ecient light resistance enables stable detecon in industrial lighng environments
•
High power amplier with small core bers enables precise posion sensing of small components
• Easy to read dual digital displays show both signal level and threshold simultaneously
•
Lever acon ber clamp provides stable, reliable, and trouble-free ber clamping
•
Simple user interface ensures easy sensor set-up and programming via displays and switches/buons or
remote input teach wire
• Expert
TEACH and SET methods ensure opmal gain and threshold for all applicaons, especially for high
speed or low contrast applicaons
• User has full control over all operang parameters: threshold, Light Operate or Dark Operate, output
ming
funcons, gain level, and response speed
• Thermally stable electronics shorten start-up me and maintain signal stability during operaon
• ECO (economy) display mode reduces amplier power consumpon by 25%
•
Sleek 10 mm wide housing mounts to 35 mm DIN rail
WARNING: Not To Be Used for Personnel Protecon
Never use this device as a sensing device for personnel protecon. Doing so could lead to serious injury or death.
This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety
applicaons. A sensor failure or malfuncon can cause either an energized or de-energized sensor output
condion.
1.1 Models
Model Sensing Beam Color Reference Sensing Range
1
Outputs Connector
2
DF-G3-NS-2M
Visible Red 3000 mm
Single NPN
2 m (6.5 ) cable, 4-wire
DF-G3-PS-2M Single PNP
DF-G3-ND-2M Dual Independent NPN
2 m (6.5
) cable, 5-wire
DF-G3-PD-2M Dual Independent PNP
DF-G3IR-NS-2M
Infrared, 850 nm 6000 mm
Single NPN
2 m (6.5 ) cable, 4-wire
DF-G3IR-PS-2M Single PNP
DF-G3IR-ND-2M Dual Independent NPN
2 m (6.5 ) cable, 5-wire
DF-G3IR-PD-2M Dual Independent PNP
Water Detecon Models
DF-G3LIR-NS-2M
Long infrared, 1450 nm 900 mm
Single NPN
2 m (6.5 ) cable, 4-wire
DF-G3LIR-PS-2M Single PNP
DF-G3LIR-ND-2M Dual Independent NPN
2 m (6.5 ) cable, 5-wire
DF-G3LIR-PD-2M Dual Independent PNP
1
Excess gain = 1 (high sensivity), opposed mode sensing. PIT46U plasc ber used for visible LED models, IT.83.3ST5M6 glass ber used for IR models.
2
Connector opons:
• A model with a QD connector requires a mang cordset (see Quick-Disconnect Cordsets—Single Output Models on page
34)
• For 9 m (29.5 ) cable, change the sux 2M to 9M in the 2 m model number (DF-G3-NS-9M)
•
For 150 mm (6 in) PVC cable with a M8/Pico-style QD model, change the sux 2M to Q3 in the 2 m model number (DF-G3-NS-Q3)
•
For 150 mm (6 in) PVC cable with a M12/Euro-style model, change the sux 2M to Q5 in the 2 m model number (DF-G3-NS-Q5)
•
For integral M8/Pico-style model, change the sux 2M to Q7 in the 2 m model number (DF-G3-NS-Q7)
•
For Q3 and Q7 Dual Output models, use a 5-pin M8/Pico-style or a 6-pin M8/Pico-style mang cordset
DF-G3 Long Range Expert
™
Dual Display Fiber Amplier
www.bannerengineering.com - Tel: 763.544.3164 3

Banner DF-G3 Long Range Expert Specifications

General

Brand	Banner
Model	DF-G3 Long Range Expert
Category	Amplifier
Language	English