Abbreviation Description
Far zero reference location—the maximum range is 0 and the measurement increase as the target
moves closer to the sensor
One-point window (foreground suppression)
Full range
Excess gain
High excess gain mode
Input wire function
Lock/locked
Laser off
Master
Near zero reference location—the end of the barrel is 0 and the measurement increase as the target
moves further away from the sensor
Object
Off delay timer
On delay timer
Reset to factory defaults
Input wire = remote teach function
Shift the Zero Reference Location after a TEACH
Slave
Response speed
Standard excess gain mode
Start
Stop
TEACH process selection
Unlock/unlocked
Saturated signal (too much light)
Zero—select the zero reference location
Q4X Stainless Steel Laser Sensor
www.bannerengineering.com - Tel: 763.544.3164 33
To Next Page
Loading...
