Banner Q4XTBLAF300-Q8 - Aperture Kits-Threaded Barrel Models; Reference Targets

SMB18A
• Right-angle mounting
bracket with a curved
slot for versatile
orientation
•
12-ga. stainless steel
• 18 mm sensor mounting
hole
• Clearance for M4 (#8)
hardware
30
41
46
A
B
C
Hole center spacing: A to B = 24.2
Hole size: A = ø 4.6, B = 17.0 × 4.6, C = ø 18.5
SMBAMS18P
• Flat SMBAMS series
bracket with 18 mm hole
•
Articulation slots for 90+
° rotation
• 12-ga. (2.6 mm) cold-
rolled steel
45
78
A
B
C
Hole center spacing: A = 26.0, A to B = 13.0
Hole size: A = 26.8 × 7.0, B = ø 6.5, C = ø 19.0
SMBAMS18RA
•
Right-angle SMBAMS
series bracket with 18
mm hole
•
Articulation slots for 90+
° rotation
• 12-ga. (2.6 mm) cold-
rolled steel
48
45
40
A
B
C
Hole center spacing: A = 26.0, A to B = 13.0
Hole size: A = 26.8 × 7.0, B = ø 6.5, C = ø 19.0
7.4 Aperture Kits—Threaded Barrel Models
APG18S
Kit with glass lens to protect plastic sensor lens
from chemical environments and weld splatter
damage.
Used with S18, M18, T18, TM18, and Q4X
Housing
Ø 22.4 mm
12.7 mm
Lens
O-ring
Additional Information
• Borosilicate glass window protects the PMMA window from weld splatter and chemicals
•
Adds 4.8 mm to the length of the threaded barrel
• Reduces excess gain by 30%; increase the response time to restore excess gain
7.5 Reference Targets
All measurements are listed in millimeters, unless noted otherwise.
Q4X Stainless Steel Laser Sensor
www.bannerengineering.com - Tel: 763.544.3164 37