R5906790 /04 Athena44
How to zoom in or out?
1. Use the “+” and “-” zoom buttons on the Local Keypad to zoom in or out.
Image 6-14
How to focus?
1. Use the “+” and “-” focus buttons on the Local Keypad to focus the image on the screen.
Image 6-15
Take into account that the lens focus may slightly drift while the lens is warming up from cold to
operation temperature. This is a typical phenomenon for projection lenses used with high brightness
projectors. The operation temperature of the lens is reached after approximately 30 minutes
projection of average video.
Button backlight colors
• BLUE : The default backlight color of the Shift, Zoom and Focus buttons is blue which indicates that the
button is enabled.
• PURPLE : When pushing the Shift, Zoom or Focus button the backlight color is purple of the part of the
button that is pushed. This indicates that the requested action is ongoing.
• RED : The backlight color of the Shift, Zoom and Focus buttons is red in case of end of range.
Lenses & Lens selection
To Next Page
Loading...
Need help?
General
