6. Repacking your display
1. Video and power cables
2. Display controller box
3. System CD(’s) and user guide
4. Power supply
5. Top buffer
6. Display
7. Bottom buffer
8. Box
6.1 Rep ackaging instructions
To repack your display
1. Place the empty box on a stable surface.
2. Place the bottom buffer in the box.
3. Put the display in its original bag and place it in the box with the panel facing downwards.
4. Put the top buffer on top of the display.
5. Put the power supply in the dedicated cavity of the top buffer.
6. Put the video and power cables in their original bag and put them in the dedicated cavity of the top
buffer.
7. When applicable, put the display controller box in the dedicated cavity of the top buffer.
8. Put the system CD(’s) and user guide in their original bag and place it in the dedicated cavity of the top
buffer.
9. Close and seal the box.
34
K5902114 NIO 3MP LED DISPLAY 03/10/2016
To Next Page
Loading...
Need help?
General
