Barco MDSC-8331 - VESA Mount Installation

K5902149 /02 MDSC-833118
CAUTION: When the display is assembled in the medical system, take care of the fixation of all
cables, to avoid unwanted detachment.
3.4 VESA mount installation
To install the display on a VESA mounting solution
The display can be attached to a VESA 100 mm or VESA 200 mm arm or stand.
Image 3–5
The VESA mounting holes at the back of the display are provided with M4-type blind fasteners to fix the VESA
mounting plate. Depending on the VESA plate thickness (T) and the thickness of possible washers (W), a
different screw length (L) should be selected.
Please respect the following rule to select an appropriate screw length:
• L
min
= T + W + 15 mm
• L
max
= T + W + 18 mm
T
W
L
min
L
max
Image 3–6
CAUTION: Use an arm that is in compliance with VESA requirements.
CAUTION: The monitor VESA interface has been designed for a safety factor 6 (to support 6 times
the monitor weight). In the medical system, use an arm with suitable safety factor (IEC60601–1).
Display installation