Barco MDSC-8331 - Image Flip; Freeze Frame; Zoom; Pan; Nd Picture Mode

29K5902149 /02 MDSC-8331
5.4.2 Image Flip
About flip mode
This function allows you to flip the image on your display.
The available options are:
• Normal (no image flip applied)
• Horz-Flip (flips the image horizontally, making the left content appear on the right and vice versa)
• Vert-Flip (rotates the image 180°)
To select the flip mode
1. Bring up the OSD main menu.
2. Navigate to the Setting menu.
3. Enter the Flip Mode submenu.
4. Select one of the available options and confirm.
5.4.3 Freeze frame
About freeze frame
This function allows you to freeze the image on your display.
To enable/disable freeze frame
1. Bring up the OSD main menu.
2. Navigate to the Setting menu.
3. Enter the Freeze Frame submenu.
4. Enable/Disable freeze frame and confirm.
5.4.4 Zoom / pan
About zoom / pan
This function allows you to zoom and/or pan the image on your display.
To enable zoom / pan
1. Bring up the OSD main menu.
2. Navigate to the Setting menu.
3. Enter the Zoom / Pan submenu.
4. Enable zoom / pan and confirm.
5.4.5 2
nd
Picture Mode
About 2
nd
picture modes
This function allows the display to show a second input source as an inset window inside the main source.
The available 2
nd
picture modes for your display are:
• PIP
• POP
• PBP
To enable/disable the 2
nd
picture mode
1. Bring up the OSD main menu.
Advanced operation