Barco MDSC-8331 - Main Source Selection; OSD Menu Locking;Unlocking

23K5902149 /02 MDSC-8331
Overview of shortkeys
1
Image 4–4
1. Main source selection
4.6.1 Main source selection
To quickly select the main source
1. Unlock the keyboard (see “Keyboard locking/unlocking”, page 20)
2. Press the
key to scroll through all the possible input signals and quickly select the main source.
Available main source options may differ depending on display model.
4.7 OSD menu locking/unlocking
About the OSD lock
As described in “OSD lock”, page 34, the OSD lock can be enabled to avoid unwanted access. When the OSD
is locked, pressing the
key after unlocking the keyboard will not activate the OSD menu, but will make the
OSD lock window appear. The OSD menu can only be accessed after pressing a sequence of keys.
To lock/unlock the menu
1. Unlock the keyboard (see “Keyboard locking/unlocking”, page 20)
2. Press the
key.
3. When the OSD lock window appears, press the following key sequence to unlock the OSD menu:
, , ,
After pressing the fourth key, if the sequence is correct, the OSD menu will be unlocked with the unlock
OSD message. if the sequence is incorrect or after exit, the OSD menu will automatically lock again.
Daily operation