Barco MDSC-8331 - Nd Picture Size; Nd Picture Swap; Nd Picture Transparency; Nd Picture Region

31K5902149 /02 MDSC-8331
5.4.8 2
nd
Picture Size
About 2
nd
picture size
2
nd
picture size is only available for PIP and POP mode.
The available 2
nd
picture sizes for your display are:
• Small
• Medium
• Large
• Maximum
To select the 2
nd
picture size
1. Bring up the OSD main menu.
2. Navigate to the Setting menu.
3. Enter the 2
nd
picture mode (PIP, POP) submenu.
4. Select the desired 2
nd
picture size and confirm.
5.4.9 2
nd
Picture Swap
About 2
nd
picture swap
This function allows the display to swap the main and 2
nd
source.
To enable the 2
nd
picture swap
1. Bring up the OSD main menu.
2. Navigate to the Setting menu.
3. Enter the 2
nd
picture mode (PIP, POP, PBP) submenu.
4. Enable the 2
nd
picture swap and confirm.
5.4.10 2
nd
Picture Transparency
About 2
nd
picture transparency
2
nd
picture transparency is only available for POP mode.
This function allows to adjust the transparency of the 2
nd
picture.
To adjust the 2
nd
picture transparency
1. Bring up the OSD main menu.
2. Navigate to the Setting menu.
3. Enter the 2
nd
picture mode (POP) submenu.
4. Select the desired value for the 2
nd
picture transparency and confirm.
5.4.11 2
nd
Picture Region
About 2
nd
picture region
2
nd
picture region is only available for PBP mode.
Advanced operation