Barco MDSC-8331 - Gamma; Color Space; Visual Menu; Brightness

27K5902149 /02 MDSC-8331
Note: If you selected the User color temperature preset, a new menu will be displayed allowing
you to manually adjust the gain and offset of red, green and blue.
5.2.2 Gamma
About gamma presets
The available gamma presets for your display are:
• 1.8
• 2.0
• 2.2
• 2.4
• DICOM (grayscale levels are following closely the DICOM curve – for reference only, not for diagnostic
purposes)
To select a gamma preset
1. Bring up the OSD main menu.
2. Navigate to the Chromatic menu.
3. Enter the Gamma submenu.
4. Select one of the available gamma presets and confirm.
5.2.3 Color space
About color space presets
The available color space presets for your display are:
• Native
• BT 709
• DCI Plus
To select a color space preset
1. Bring up the OSD main menu.
2. Navigate to the Chromatic menu.
3. Enter the Color Space submenu.
4. Select one of the available color space presets and confirm.
5.3 Visual menu
5.3.1 Brightness
To adjust the brightness level
1. Bring up the OSD main menu.
2. Navigate to the Visual menu.
3. Enter the Brightness submenu.
The command bar Brightness is highlighted.
4. Set the brightness level as desired and confirm.
Advanced operation