Barco MDSC-8331 - Technical Specifications

K5902149 /02 MDSC-833152
6.9 Technical specifications
Overview
Screen technology TFT AM LCD
Active screen size
(diagonal)
789 mm (31.1")
Active screen size (H x V) 698 x 368 mm (27.5 x 14.5")
Aspect ratio 17:9
Resolution 4k-2k (4096 x 2160)
Pixel pitch 0.1704 mm
Color support 1073 million (10-bit)
Color gamut Native: Wide color gamut (96% DCI-P3)
Default setting: DCI plus
Viewing angle 178° (panel typical)
Luminance Native: 550 cd/m² (panel typical)
Default setting: 410 cd/m² (factory calibrated @6500K and default color
gamut)
Backlight sensor Automatic backlight stabilization. Choose between SBC (Stable Backlight
Control) for OFF (default), 300, 350, 400, 450 and 500 m/cd².
Contrast ratio 1300:1 (panel typical)
Response time (Tr + Tf) 20 ms (typical)
Housing color White RAL 9003
Video inputs 4K-UHD input:
- 1x HDMI 2..0 TMDS up to 4096 x 2160 @60Hz
- 1x DP 1.2 SST up to 4096 x x2160@60Hz (RB) and 10 bits per color
FHD input (upscaled to UHD):
- 2x DVI-I up to 1920 x 1200 @60Hz
- 1x3G-SDI
- RS-232C
Video outputs 1x DVI (SDI input signal converted to TMDS signal on DVI out)
Power requirements
(nominal)
Power source for external power supply: 100 – 250 VAC / 50-60 Hz auto-
switch
Power source for display power input: +24 VDC / 6.25A
Power consumption Normal operation: 90W (nominal)
Low power mode: ~7 W (typical)
Soft power-off: ~5 W
DC power-off: ~0.5 W
Power management Power On state
Active-Off state
Gamma curve Native, 1.8, 2.0, 2.2, 2.4, DICOM
Dimensions display (W x H x
D)
777 x 472 x 92 mm (30,6” x 18,6” x 3,5”)
Important information