Barco MDSC-8331 - Input Select Menu; Main Source; Chromatic Menu; Color Temperature

K5902149 /02 MDSC-833126
5.1 Input select menu
5.1.1 Main Source
About main sources
The available main sources for your display are:
• DP 1.2
• HDMI 2.0
• DVI 2
• DVI 1
• SDI
Available main source options may differ depending on display model.
The main source can also be quickly selected through the Input selection key ( ), without the need
to navigate through the OSD menu.
To select the main source
1. Bring up the OSD main menu.
2. Navigate to the Input Select menu.
3. Enter the Main Source submenu.
4. Select one of the available main sources and confirm.
5.2 Chromatic menu
5.2.1 Color temperature
About color temperature presets
The available color temperature presets for your display are:
• 6500K
• 7500K
• 9300K
• Native
• User
Factory calibration – White point:
The White Color points associated with the Color Temperature: 6500K, 7500K or 9300K are factory
calibrated with a consequent reduction of the maximum luminance compared to Native Color
Temperature.
Only in case the User preset has been selected it is possible to get access to the color regulation
commands to adjust the gain of red, green and blue primary colors.
To select a color temperature preset
1. Bring up the OSD main menu.
2. Navigate to the Chromatic menu.
3. Enter the Color Temp submenu.
4. Select one of the available color temperature presets and confirm.
Advanced operation