K5902149 /02 MDSC-833130
2. Navigate to the Setting menu.
3. Enter the 2
nd
picture mode (PIP, POP, PBP) submenu.
4. Enable/Disable the selected 2
nd
picture mode and confirm.
5.4.6 2
nd
Picture Source
About 2
nd
picture sources
The available 2
nd
picture sources for your display are:
• DP 1.2
• HDMI 2.0
• DVI 1
• DVI 2
• SDI
Independent Transfer Function:
Gamma and Color temperature independently from the function applied to the Main Picture Source.
These function can be selected for the 2nd Picture Source if the selected window is 2nd window in
the Picture by Picture(PBP) mode. G2.2 and 6500K is as default for 2nd Picture Source.
To select the 2
nd
picture source
1. Bring up the OSD main menu.
2. Navigate to the Setting menu.
3. Enter the 2
nd
picture mode (PIP, POP, PBP) submenu.
4. Select one of the available 2
nd
picture sources and confirm.
5.4.7 2
nd
Picture Position
About 2
nd
picture position
2
nd
picture position is only available for PIP and POP mode.
The available 2
nd
picture positions for your display are:
• LF-Top
• MID-Top
• RF-Top
• LF-Middle
• Center
• RT-Middle
• LF-Bottom
• MID-Bottom
• RT-Bottom
To select the 2
nd
picture position
1. Bring up the OSD main menu.
2. Navigate to the Setting menu.
3. Enter the 2
nd
picture mode (PIP, POP) submenu.
4. Select the desired 2
nd
picture position and confirm.
Advanced operation
To Next Page
Loading...
