Random Access Adjustment Mode
5976381.01 BARCO CINE6 31012002 ___________________________________________________________________________ 6-1
RANDOM ACCESS ADJUSTMENT MODE
Starting up the Random Access Adjustment Mode.
Highlight RANDOM ACCESS in the ADJUSTMENT MODE menu with the arrow keys on the RCU, and then press ENTER.
Some items in the Random Access Adjustment mode are password protected (when the password function is enabled). Enter
your password to continue. All other password protected items are now also available if you stay in the adjustment mode.
ENTER continues to setup Pattern Selection.
EXIT returns to previous menu.
Overview of Random Access Adjustment mode.
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
COLOR SELECT
COLOR BALANCE
GAMMA
RASTER SHIFT
H & V SIZE
V LINEARITY
BLANKING
TOP
BOTTOM
LEFT
RIGHT
V CENTERLINE BOW
V CENTERLINE SKEW
BOW
KEYSTONE
H CENTERLINE BOW
H CENTERLINE SKEW
TOP BOW
TOP KEYSTONE
BOTTOM BOW
BOTTOM KEYSTONE
6
TOP - BOTTOM (N - S)
LEFT - RIGHT (E - W)
MAIN MENU
Image Control
Function Keys
Service Menus
Select with or
then <ENTER>
<EXIT> to return.
WARNING
RISK OF INCORRECT
ADJUSTMENT OF THE
PROJECTOR.
The following service menus are
reserved to, and to be performed
only by qualified personnel !
If qualified, press <ENTER> to
continue, or if not, <EXIT> to
return.
ADJUSTMENT MODE
Select a path from below :
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
Source 1
Select with or
then <ENTER>
<EXIT> to return.
DECODING : EBU
PORT2 : S-VIDEO
H - PHASE
SETUP PATTERN
SELECTION
When source 2 selected
NTSC pattern
Does not appear
on input pattern
Appears only
when a source is
connected
SELECTED SOURCE
GENLOCKED PATTERN
INTERNAL PATTERN
LINE MULTIPLIER
LIMO Option
To Next Page
Loading...
