Random Access Adjustment Mode
5976381.01 BARCO CINE6 31012002 ___________________________________________________________________________ 6-9
Gamma
The GAMMA adjust function acts on the luminance content of the image. It has
a non-linear amplification characteristic. At minimum Gamma ( < 1 ), the lower
parts of the signal are amplified with higher gain.
Select with
or
PICTURE TUNING
COLOR BALANCE
GAMMA
DECODING : EBU
PORT 2 : S - VIDEO
LINE MULTIPLIER
<ENTER> to accept
<EXIT> to return
ENTER will toggle Decoding between EBU and IRE
EXIT will return to the Random Access Adjustment Menu
Decoding
Only for NTSC signals.
Highlight 'DECODING' with the arrow keys. Pressing ENTER will toggle between
EBU and IRE standards.
<EXIT> to return
then <ENTER>
or
Select with
PICTURE TUNING
PORT 2 : S -VIDEO
LINE MULTIPLIER
GAMMA
COLOR BALANCE
DECODING: EBU
ENTER will toggle PORT 2 between S-Video & Video
EXIT will return to the Random Access Adjustment Menu
PORT 2 : S-Video
Port 2 can be used as a Video or S-Video input.
When connected to a S-Video this menu will appear automatically. Pressing enter
will toggle between S-Video & Video.
Toggling this to video will give a monochrome picture. Toggling to S-Video will again
give a color picture.
ENTER will select the GAMMA function
EXIT will return to the Random Access Adjustment Menu
Select with
or
PICTURE TUNING
COLOR BALANCE
GAMMA
DECODING : EBU
PORT 2 : S - VIDEO
LINE MULTIPLIER
<ENTER> to accept
<EXIT> to return
Select with
or
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
COLOR SELECT
<ENTER> to accept
<EXIT> to return
Color Select
Highlight COLOR SELECT using the arrow keys and press ENTER to display the
color select menu.
ENTER continues to the color select menu.
EXIT will return to the previous menu.
ADJUST returns to operational mode.
Use the arrow keys to highlight a color (CRT) or combination of colors to display the image in that specific color.
To select a new color, press ENTER. The color selection menu appears again on the screen.
To terminate the color selection process, press EXIT.
<EXIT> to return
then <ENTER>;
or
Select with
COLOR SELECT
RED
GREEN
BLUE
RED AND GREEN
BLUE AND GREEN
RED AND BLUE
ENTER continues with the selected color or color combination.
EXIT returns to the Random Access Adjustment main menu.
To Next Page
Loading...
