Barco R9002372 - Copy a Block; Deletion of Blocks; Deleting Block by Block

Service Mode
7-6 _________________________________________________________________________ R5976381.01 BARCO CINE6 31012002
Copy a Block
The 'COPY A BLOCK' function copies the settings of a selected memory block into the active block. Highlight COPY A BLOCK
using the arrow keys and press ENTER. The Copy Mode menu is displayed.
To copy the settings of a closed block to the active block, use the arrow keys to select a block. All existing settings will be
over written with the new settings. Press ENTER to copy the selected block. A confirmation screen will be displayed. In the
confirmation screen, ENTER executes the Copy operation and EXIT returns without copying the block.
Deletion of Blocks
This item is password protected. The delete function is used to clear all data (settings) from an adjustment block.
Deletion can be done :
- block by block
OR
- for all blocks.
Deleting block by block
Highlight DELETE A BLOCK using the arrow keys and press ENTER. Continue with the next block to be deleted. Press EXIT
when finished to return to the Memory Management menu.
MEMORY MANAGEMENT
or
<EXIT> to return
then <ENTER>
Select with
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MID POS
R & B CONVERGENCE TO MID
COPY A BLOCK
MEMORY MANAGEMENT
or
<EXIT> to return
then <ENTER>
Select with
DELETE ALL BLOCKS
ALL SETTINGS TO MID POS
R & B CONVERGENCE TO MID
COPY A BLOCK
DELETE A BLOCK
COPY MODE
or
<EXIT> to return
<ENTER> to copy
Select with
Nr. Src Fh Fv inp Conf
1 1 31.5 50 video FC
2 2 31.5 60 int FC
3 33.5 60 int FC
4
5
Active block nr. 1
Scroll with or
DELETE MODE
or
<EXIT> to return
<ENTER> to delete
Select with
Nr. Src Fh Fv inp Conf
1 1 31.5 50 video FC
2 2 31.5 60 int FC
3 33.5 60 int FC
4
5
Active block nr. 1
Scroll with or
DELETE BLOCK
<EXIT> to cancel
<ENTER> to Confirm
The selected block
will be deleted !
COPY BLOCK
<EXIT> to return
<ENTER> to Confirm
settings
in current block
will be overwritten !