Random Access Adjustment Mode
5976381.01 BARCO CINE6 31012002 ___________________________________________________________________________ 6-3
Select with é or ê
<ENTER> to accept
<EXIT> to return.
PICTURE TUNING
COLOR BALANCE
GAMMA
DECODING : EBU
PORT 2 : VIDEO
LINE MULTIPLIER
Select with é or ê
then <ENTER>
<EXIT> to return.
IMAGE PROCESSING
LINE MULTIPLIER : ON
MOTION PROCESSING : ON
VIDEO EQUALIZING
NOISE REDUCTION
CONTRAST ENHANCEMENT
SPLIT SCREEN : OFF
ADVANCED SETTINGS
menu 2
Line Multiplier
1. Push the cursor key é or ê to select Line Multiplier (menu 1).
2. Press ENTER to select.
The line multiplier menu will be displayed (menu 2).
menu 1
How to activate ?
1 Push the cursor keys é or ê to select 'Motion Processing' (menu 1).
2 Press ENTER to toggle between ON and OFF.
Motion Processing
Why Motion Processing ?
With this function it is possible to recognize whether the source material was originally film or video. That prevents the creation of
motion artifacts.
Select with ç or è
Adjust or scroll presets
with é or ê
<EXIT> to return.
LOW MID HI.
FACTORY PRESET : x
menu 2
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
IMAGE PROCESSING
LINE MULTIPLIER : ON
MOTION PROCESSING : ON
VIDEO EQUALIZING
NOISE REDUCTION
CONTRAST ENHANCEMENT
SPLIT SCREEN : OFF
ADVANCED SETTINGS
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
IMAGE PROCESSING
LINE MULTIPLIER : ON
MOTION PROCESSING : ON
OUTPUT MODE
VIDEO EQUALIZING
NOISE REDUCTION
CONTRAST ENHANCEMENT
SPLIT SCREEN : OFF
ADVANCED SETTINGS
Video Equalizing
What can be done ?
The sharpness of the image can be adjusted for 3 frequency bands (low, medium and high) separately.
In addition to the pre-programmed factory presets a customized adjustment of the sharpness for 3 ranges is also possible.
How to select Video Equalizing ?
1 Push the cursor keys é or ê to select 'Video Equalizing' (menu 1).
2 Press ENTER to display the adjustment menu (menu 2).
How to adjust the Video Equalizing ?
1 Push the cursor keys ç or è to select 'Low' or Mid' or 'HI.' or 'Factory Preset : x'
2 Push the cursor keys é or ê to adjust the sharpness in the chosen band (low, mid, high) or to scroll through the factory preset
(x = 1 to 7).
Factory preset 8 is equal to the custom adjustment as made with low, mid and high.
To Next Page
Loading...
