R5900049 /07 ClickShare CSE-800 45
Note: The local variant of the power cable is included in the CSE-800 box.
European version Type C and type G
Japanese version Type A
Chinese version Type I CCC
North American
version
Type A
2. To power on the unit, set the rocker switch to “1”.
If the Base unit does not start up automatically, use the standby button.
The standby button at the front can now fully control the unit.
The standby button has the following functions:
• When the system is awake, a short push triggers the system to go into standby mode.
• When the system is in standby mode, a short push triggers the system to wake up.
CSE-800 Installation
To Next Page
Loading...
Need help?
General
