R5900049 /07 ClickShare CSE-800 93
Image 6-41: Compatibility
3. Check the check box next to Allow Buttons with certificate... .
Checked: allowed to pair with devices without certificate.
Not checked: not allow to pair with devices without certificate.
4. Check the check box next to Allow Buttons without certificate...
Checked: allow to pair with this Base Unit. Pairing can only be done when security level is set to 1. When a
higher security level was set when checking the check box a message “Due to your changes the security level
is downgraded to level 1”.
Not checked: not allow to pair with this device.
5. Click Save changes to apply the setting.
Changing the Compatibility setting will require a re-pairing of the Buttons used with this Base Unit.
6.23 Security, security level
About security levels
For the use of the ClickShare system, a security level can be set. By default, level 1 is activated. A security
level is a predefined set of settings which are automatically set when a level is selected.
Level 1 : offers support for normal day-to-day operations in any organization.
Level 1 contains the standard security options and encryption of audio and video data.
The standard security options are:
• PIN code activation for mobile apps and Buttons,
• ClickShare Configurator (WebUI) access via HTTPS with login management,
• no wireless ClickShare Configurator (WebUI) access,
• SSID of Wi-Fi network is hidden.
Level 2 : this level offers a higher degree of security, fit for organizations that are more sensitive to security
matters.
Level 2 contains the level 1 security and a mandatory PIN code for mobile devices. Alphanumeric PIN codes
for mobile apps and Buttons and the Buttons require a certificate for pairing.
Level 3 : this level is used for organizations that have extremely strict requirements with regards to security.
Level 3 contains the level 2 security extended with blocking of mobile apps, downgrading firmware not
possible and no wireless access to the Configurator (WebUI).
CSE-800 Configurator
To Next Page
Loading...
Need help?
General
