R5900049 /07 ClickShare CSE-80058
The default SSID and password to connect to the Base Unit are respectively 'ClickShare-<serial base
number>' and 'clickshare'.
2. On your laptop, open a browser.
Note: Supported browsers are Internet Explorer, Firefox and Safari.
3. Browse to http://192.168.2.1.
A login screen appears.
4. Enter the user name 'admin' and the password, read and accept the EULA and click OK.
By default the password is set to 'admin'.
The web interface opens.
Older laptops might not support the 5 GHz Frequency Band. If your Base Unit is set to that
frequency range, those devices will not be able to connect to the Base Unit via the wireless network.
Overview of functions
Group
Function
Personalization On-Screen ID
Wallpaper
Configuration Files
Display & Audio Display & Audio
Wi-Fi & Network Wi-Fi Settings
LAN Settings
Network integration (not for CS-100)
Services
Security Compatibility
Security levels
Passwords
System Base Unit Status
Date & Time
Energy Savers
Buttons
Blackboard (only for CSE-200+)
Support & Updates Firmware
Troubleshoot
When a setting is changed, always click Save changes to store the changes.
6.2 ClickShare Configuration Wizard
About the configuration wizard
During the first start up of the Base Unit, the configuration wizard starts up automatically.
All basic settings necessary to configure the Base Unit are covered by the configuration wizard. Once the
configuration wizard is finished, the Base Unit is ready to be used.
CSE-800 Configurator
To Next Page
Loading...
Need help?
General
