Barco RLM W12

44 of 123
Unplug the 5 connectors and loosen 2 screws
on the Fan C board.
Take out the Fan C board.
Loosen 6 screws on the FIP signal cable in
the bracket.
Take out the 2 group cables from concave
space in the bracket.
Take out the 2 group cables from fasten tie and 1
group cables concave space in the bracket.
Take out the bracket.
4-7 Fan B Board & Filter & Lamp 1 & Lamp 2 & Fan 2 & Fan 3