29
3.1 Installation requirements ...............................................................................................................30
3.2 Unpacking the projector ................................................................................................................32
3.3 Initial inspection............................................................................................................................34
3.4 Projector orientations ....................................................................................................................35
3.5 Projector positioning .....................................................................................................................37
3.6 Projector shift and tilt range ...........................................................................................................38
3.7 Lens selection ..............................................................................................................................39
3.8 Available lenses ...........................................................................................................................40
3.9 Download Projector Toolset...........................................................................................................42
About this chapter
Read this chapter thoroughly before installing the projector. It contains important information concerning
installation requirements for the projector, such as minimum and maximum allowed ambient temperature,
humidity conditions, required safety area around the installed projector, required power, etc.
In addition, careful consideration of things such as image size, ambient light level, projector placement and
type of screen to use are critical to the optimum use of the projection system.
Barco provides a guarantee relating to perfect manufacturing as part of the legally stipulated terms
of guarantee. Observing the specification mentioned in this chapter is critical for projector
performance. Neglecting this can result in loss of warranty.
R5906113 /09 UDX
Prepare to install 3